Searches

Clean the iron from plastic


How to clean the iron from melted plastic: all the instructions for cleaning the soleplate of your iron.

Clean the iron it is an operation that should be done at least once a month. Aclean ironit is more efficient, consumes less and lasts longer.

Dirty iron, how to do it

Over time, on the plate of the iron dirt accumulates; in the worst cases, deposits form both on the plate and in the boiler. Limescale deposits are harmful to the iron. A dirty plate could compromise the safety of the garments at the time of ironing.

Not to mention the disasters: aburnt ironit's a real drama… but no worse than a dirty iron from burnt plastic!

If you care about your bosses, that's it how to clean the iron using natural remedies or resorting to more extreme solutions.

How to clean the iron from burnt plastic

Let's start immediately explaining how to solve one of the most annoying problems in terms of cleaning your iron: what to do to remove burnt plastic from the plate.

Our advice is to use a sheet of newspaper sprinkled with a detergent powder to pass your iron on.

Alternatively, you can use a sheet of tinfoil on which you will have to spread fine kitchen salt: by passing the iron over the foil sheet, you will free the plate from the plastic using the abrasive effect of the salt.

Among the actions NOT to do to clean plastic from the iron plate, we mention the use of metal objects as you could damage or scratch it.

Products for cleaning the iron

There are several specific products on the market for cleaning iron, are in stick or paste. These products are quite effective especially for those who find themselves with a completely burnt plate but have considerable disadvantages.

These products have a strong ammonia smell, are relatively expensive and should be used with caution. They can damage the skin or even irritate the airways (if inhaled).

Among the products on the market we point out the two most effective and least harmful.

Stick General fix wax
It is suitable for both steam iron soleplatethan that of a normal iron. The manufacturer describes it as "ecological and non-polluting", in fact it does not contain waxes but ... when you use it you will smell of ammonia so be careful not to inhale the vapors. On Amazon it is offered at a price of 7.90 euros with free shipping costs.

How to use?
Activate the iron, bring it to a temperature of 145 - 150 ° C (or on the “wool” or OO program). Apply the stick in a circular motion over the entire surface of the plate, even the burnt residues, limescale, fibers or plastic will go away.

Those looking for cheaper products can focus on cleaning wipes but which, in my opinion, are more suitable for routine maintenance: to remove light limescale, dirt and impurities that are not deeply encrusted.

As an alternative to chemicals we can resort to simpler ones remedieshousehold items that can be very effective and certainly less expensive.

How to clean your iron with natural products

Among the natural treatments for cleaning the iron plate, we find:

  • Salt and vinegar.

Prepare a solution made of vinegar and coarse salt. Apply to the iron plate by rubbing with a soft sponge. Rub until you get a shiny iron soleplate. Then remove any possible salt residues with a damp cloth.

ATTENTION: the iron must be cold before proceeding.

  • Lemon.

As an alternative to vinegar, we can use lemon. Proceed by cutting the citrus fruit in two and rub on the plate with the inside, then rinse and clean with a damp cloth.

  • Bicarbonate.

For this procedure it is sufficient to heat the iron only slightly. Rub a slightly abrasive sponge on the plate accompanied by a paste made from distilled water and sodium bicarbonate. If not, you can just wipe with a microfiber cloth together with the baking soda.

ATTENTION: at the time of the operation make sure that the plug is disconnected from the current.

How to remove limescale from the iron

If, instead of demineralized water, you use tap water, the iron it can easily be subject to the formation of limescale deposits.

The limescale will not only be concentrated on the plate but also along the pipes and in the steam holes. To clean it, you can use the following method:

  1. Fill the tank with white vinegar and turn on the iron.
  2. While it heats up, shake the iron well to break up the limescale deposits in the tank and pipes.
  3. Then put the iron over the sink and press the steam and / or water button several times to release the vinegar from the holes in the plate.
  4. Empty the remaining vinegar from the iron and fill the tank with water.
  5. Heat again and let out the steam to completely eliminate the vinegar.

If necessary, repeat all these steps until the limescale is completely eliminated.

One of our related articles that I recommend you read is Iron: how to clean the plate and the boiler with vinegar


Video: Removal of plastic on a flat iron (January 2022).